When it comes to keeping up the health and safety code of a building, one of the important things to watch out for is condensation. When warm air touches something cold, like a metal building, the air becomes colder. Then when the air can’t hold all of the moisture caused by the temperature change, water droplets are formed, hitting the steel of the wall. Here are some ways to prevent that from happening.
1. Keep Circulation Going
When there’s humidity, there’s a lot of moisture in the air. A good way to avoid all of that from just sitting in the air and turning into droplets is to keep cool air blowing through at all times. Keeping fans or air conditioners on consistently will let the air circulate, cool off the warm temperature and help prevent condensation. You can also use a dehumidifier to help with this problem.
2. Provide Quality Ventilation
When you have vents in your rooms that are dealing with condensation, it sucks out the hot air so that it’s not sitting in the room and changing temperatures. If you put a gas or oil heater on the outside, you can install vents from there and put ceiling vents inside the rooms that need condensation prevention. This is particularly helpful if there are lots of people or equipment in the room.
3. Ensure Good Insulation With some good vinyl-backing insulation on the inside of your walls and ceilings, that will prevent the humid air from making contact with the metal panels. It also helps to control the temperature of these steel buildings without so much cost put into electricity to keep air conditioners running. Though insulating the building is a big project, it is definitely worth it.
4. Check Your Lights
Sometimes lights can affect the temperature of your room. So one way to prevent condensation is to, either personally or professionally, get your heating and light fixtures checked. If you have an oil heater that is located right underneath a steel panel, that is sure to generate condensation, and should be replaced.
The Dangers of Condensation- Preventing condensation is important because water damage is a serious thing when it comes to metal or steel buildings. Corrosion is one of the ways that it can affect your walls, causing the metal to weaken and thus shortening the life of the steel. Condensation can also cause mold or mildew, which creates bad odors and can be very dangerous for anyone with asthma or allergies. Finally, condensation can cause insect infestations, or even reduce the effectiveness of your wall’s insulation.
Now that the dangers of condensation have been discussed and the tools for preventing it have been given, it’s important to take the proper measures to do what needs to be done. Whether it is a simple solution that you can tackle on your own or would prefer to call in a professional, make sure you take it care of as soon as possible for the best quality repair.